Classified ads Regulator

Mares Prestige 12s regulator set 6 parts with octopus, finimeter, etc.

Very good condition

Wolfsburg

Hi
sell a regulator set consisting of 2x Scubapro MK17 1st stage and 2x G250V 2nd stage due to abandonment of diving.
The set is currently set up as a DIR set, so with long pants 2.10m and a short regulator with elastic band.
Included is a mineral glass fini with boltsnap and a storage bag.

The hose configuration with the MK17 works great for both mono bottle and double unit with bridge, so that all hoses run down and there is no chaos.

The regulators are suitable for cold water and offer a super breathing comfort. They never let me down, not even if you provoked it in the really cold water. I was always very satisfied. The controllers are about 3 years old. They were last in revision a year ago, without any problems. This year, the regulators were only dipped on a holiday. Overall, they were mainly immersed in fresh water.

A revision is strongly recommended before use, I do not assume any guarantee or guarantee since sale of private, use at your own risk.

Price is 350 euros.

Freiburg

Hardly used, very good condition.

1st and 2nd stage: Aqualung Titan

Octopus: Aqualung

Finimeter: Mares Mission

Price VHB 210EUR

75015 Bretten

I have to give up diving for health reasons.

I sell two cold water suitable regulators from Apex. Two 1st steps incl. Apex regulator and Apex Reserve regulator as well as combination display pressure / depth
VB 320 Euro

Since this is a private sale, I can of course not offer a guarantee or return. Upon collection, the function can of course be checked.
In the case of shipping, the shipping costs are added.

52249 Eschweiler

Sell regulator set APEKS ATX 50/DS4 with APEKS regulator bag.

Price 185 EUR

Private sale--without guarantee/warranty--no return

Nähe Düsseldorf

Medium pressure hose for connecting the 2nd stage of the regulator; 3/8 inch, 150 cm, used, error-free condition
20 EUR plus 2 EUR shipping within Germany.

35510 Butzbach

Medium pressure hose for connecting the 2nd stage of the regulator; Miflex, 1/2 inch, 150 cm, used, error-free condition
20 EUR plus 2 EUR shipping within Germany.

35510 Butzbach

Medium pressure hose for connecting the 2nd stage of the regulator; Miflex, 3/8 inch, 74 cm, used, faultless condition
20 EUR plus 2 EUR shipping within Germany.

35510 Butzbach

Medium pressure hose for connecting the 2nd stage of the regulator; Miflex, 1/2 inch, 210 cm, used, error-free condition
20 EUR plus 2 EUR shipping within Germany.

35510 Butzbach

I offer a Poseidon Cyklon 300 regulator with console. Unfortunately, the Aqualung Monitor 2 computer in the console no longer works. If necessary, the battery would have to be replaced. Otherwise, a compass and a fini are included in the console.

Price: 220,- VB

Kaarst

Offer used
Apek's regulator
ATX 100
with finimeter and inflator hose

Price 200EUR incl shipping in Germany

Private sale no return or guarantee

Ludwigshafen am Rhein

Scubapro Regulator Mark V/Mark V
200 bar compressed air, 2nd stage freshly revised,
1st stage in need of revision,
legendary very robust regulator for 130 EUR incl. shipping

73642 Welzheim

Vest machine AP Valves Auto Air with inflator hose, working but still better revision.

35 EUR incl. shipping

73642 Welzheim

A controller set from Aqualung Typ Legend is sold.
Consisting of two 1st steps and two 2nd stages with inflator hose, fini, boltsnaps etc. As shown. One of the 2nd steps has a 2.10 m long medium pressure hose. It is the usual configuration for double bottles. The controller set was also used for very deep dives in fresh water and has proven to be extremely reliable and ice-proof.
Price: 320,-EUR
Insured shipping: 7,-EUR

Mainz

I offer a Poseidon Cyklon 300 regulator with console.
Unfortunately, the Aqualung Monitor 2 computer in the console no longer works. If necessary, the battery would have to be replaced. Other things, a compass and a fini are included in the console.
As you can see, the controller is in a decent condition, but a revision should still be made before use.

Price: 125,- VB

Kaarst

Scubapro Regulator Mark V/Mark V
200 bar compressed air, 2nd stage freshly revised,
1st stage in need of revision,
legendary very robust regulator for 130 EUR incl. shipping

73642 Welzheim

Vest machine AP Valves Auto Air with inflator hose, working but still better revision.

35 EUR incl. shipping

73642 Welzheim

Poseidon Cyclo 5000 O2, Revision Dec.2015
very good condition
Hose length 1,20m
with bag 2nd step

Price 160,00EUR

Anröchte

Poseidon Cyclon 5000, Revision Dec.2015
very good condition
Hose length standard

Price 160,00EUR

Anröchte

Poseidon Cyclon 5000, Revision Dec.2015
very good condition
Hose length 90cm

Price 150,00EUR

Anröchte

exchange apeks m26 for m25

Gernsheim

Search Softcover / Mundusche for Sailor SL 350, also offer defective 2nd stage. Thank you

Oberkirch

Sell a used pressure reducer for the Dräger Dolphin circulator. It is the original 1st stage with the M24x2 Dräger Nitrox connection as a piston-controlled version including the two MD hoses for connection to the bypass and the nozzles as well as a Dräger Finimeter.
You can use it right away. Nevertheless, I recommend an inspection/revision.
Shipping is done with DHL insured for 7EUR.
149,-
It applies according to EU law for private sale, the item is sold as described to the best of our knowledge under exclusion of any warranty and return.

Brandenburg

Scubapro 1st stage MK 20 UL; slight traces of oxidation (better not to dive in salt water), but fully operational.
Only 49,-
This is a private ad

Brandenburg

Everything has to go!
z.B. regulator 2x Poseidon Cyclon 5000; with carrying bag, instruction booklet, an ice cap, finimeter, BCD connection hose, a few spare O-rings.
Little dipped (I preferred Scubapro), but have now been well packed for a few years. For safety, they should be overhauled.
Completely only 499,-

Brandenburg

I sell a used "Apeks DST" first stage with additional "5th port" output (additional medium pressure output, ideal for sidemount configuration) in good condition.

Of course, this first stage must be maintained before diving.

Photos on request.

EUR120 incl. shipping within Germany.

Berlin

Offer a new console from Poseidon here. Was on my new Xstream controller and after a ! TG exchanged for another ( which suits me better ).

As I said, nothing broken, was only exchanged because of personal sensitivities.

See photos- No traces, because as I said only one TG used.

180 EUR

Cottbus

Sell a kpl. Set with two first stages. MR 22 DFC & Abyss DFC with Voltex and Octopus and console with finimeter and compass and hose for the jacket.
280,- VB.

Lilienthal

Offer here an octopus from the quality forge of Aqualung. It is a calypso octopus.

A rubber band is attached to the octopus as a halter, so it is quickly and safely at hand.

Sale Price: 20,00EUR VB

Shipping: 6,00EUR


The shipping costs refer to shipping in advance and within the German mainland. If shipping by last name is desired, higher shipping costs will be incurred. Shipping takes place exclusively by post or DHL
The sale takes place as a private sale without guarantee, exchange, warranty according to BGB, EU law etc.

This regulator set is completely redesigned by the diving center BlueWaterDiver in Regensburg and has so far 65TGs on it.
For the complete revision, only oxygen-compatible grease was used. Thus, the controller set is fully oxygen-compatible/pure! The measurement protocols and replaced parts are included.
The set consists of:
- 2x First stage Apeks DS4, DIN connection
- 2x Second Stage Apeks XTX50
- 1x medium pressure hose, 210cm length (main controller "Long Hose")
- 1x medium pressure hose, 70 cm length (backup controller)
- 1x inflator hose approx. 50cm
- 1x DIR Zone Finimeter 200bar, approx. 55mm diameter incl. approx. 60cm high pressure hose
- 2x stainless steel carabiner 90mm for attaching the main machine and finimeter
- 1x neck rubber for backup control (bungee chord 4mm)


Accessories:
- 2x Revision Kit 1st Level (DS4)
- 2x Revision Kit 2nd Level (XTX50)
- 1x hook key for 2nd level
- 1x oxygen compatible lubricant Christo Lube MCG 111 approx. 30g
- 1x regulator bag Aqualung Red Line 50

Set price: 600EUR

Regensburg

Regulator set Apeks CTX 40 with Octopus AT 20 (identical to the XTX series) freshly revised in February 2016. 1st stage (suitable for 300 bar) can also be rotated under pressure, for optimal hose routing. Included are matching Miflex hoses and an Apeks mouthpiece instead of JAX mouthpiece. The inflator hose and the finimeter are not sold.
Private sale, therefore without guarantee and warranty. Test report of the revision can be sent on request.
Price: 320 EUR VB

Georgsmarienhütte

Hello everyone, there are a total of three hoses on offer:

1/2" Miflex, see picture, approx. 77cm, dipped 1 time, then converted to long hose. VB: 20EUR+shipping or make me an offer

1/2" Miflex, (not in the picture) black, about 77cm, used, due to conversion to shorter hose. VB: 18+Shipping or make me an offer

Inflator hose, Miflex, approx. 75cm. Because of new jacket switch to shorter hose.
VB 20EUR + shipping or make me an offer.

The set consists of

•Apeks DST first stage
•XTX 50 second stage
•BTS Finimeter
•100 cm and 15 cm rubber hose

Have used the stage controller about 10 times. So it's still very good as new!
I will be happy to answer any further questions by email

Price including shipping: 310EUR

22525 Hamburg

Sell a new Apeks XTX200 with octopus 40 set.
It is unused and still originally shrink-wrapped in cardboard.
Has been a gift, therefore for 375EUR

Karlsruhe

Additional respiratory controller Air 2 with medium pressure hose hose 50, - EUR VB plus shipping, for sale. In use until 2015.No revision carried out.
Private sale. No guarantee, warranty or return.

Zwickau

Offer here my Mares 1st level MR 12ST with spare rings for sale. approx. 10TG from 2009
VB 50EUR
Plus shipping or pick-up in Lüdenscheid, Lennestadt or Limburg/Diez possible

57368 Lennestadt

Still have 2 right old regulators, is rather something for the showcase.

Seemann Sub 2nd stage with MD hose

Barakuda 1st and 2nd stage

Preferably both together for 60, - EUR or against bid.

Mainz

I offer a used regulator Cressi Ellipse Titanium MC9:
1st stage MC 9 SC
2nd stage Ellipse Titanium
In addition, a Cressi regulator Octopus Ellipse and inflator hose.
Purchased in 2012: 19 dives by 2013: revised and 20 dives by the end of 2014.
Since 2015 I dive with a different regulator.
Price VB 200,- Euro

since private sale no guarantee and no return

Oberhausen

Sell regulator set Aqualung Legend with LX and two first stages. The set is newly revised in the specialist trade (cost for it: 170EUR) then no longer dipped. Invoice is enclosed. Technically everything flawless! Main controller with 210cm flex hose, second controller with 60cm and neckband. Finimeter and inflator hose also included. Original hoses are included. All this in a Beuchat regulator pocket.
Price VB. 320EUR
If you are interested or have any questions: Tel.: 0172 568 7730
K. Bienick

Hückelhoven

Hello

sell used Apeks DS4. The first stage works perfectly.


Revision is recommended as always with used regulators.

Price 70EUR plus shipping

Sell new and unused exhibit

1st and 2nd stage Legend DIN with Miflex MD hose for 350EUR

I offer a Poseidon Cyklon 300 regulator with console. The Aqualung Monitor 2 computer in the console has stopped working. Otherwise there is a compass and a Fini in the console
I was in the water with it recently and the regulator worked perfectly. However, I would still recommend a revision.

Price: 160,- VB

Kaarst

Poseidon regulator (1st and 2nd stage)
Cyclone 300
Special Edition
The 73rd of 500
From 1993
Completely original with certificate, leather ribbon and wooden box.
Has never been dived.

Price: 1000,00 VB

Dortmund

I would like to sell my DIR regulator set. There are 2 regulators "Poseidon XSTREAM Deep 90" each consist of a 1st stage, a 2nd stage, two inflator hoses and a Finimeter of the brand UWATEC with mineral glass. Of course, the set also includes the Boltsnaps!

Hose lengths:
1. Controller:
210 cm hose for the 2nd step
56 cm inflator hose (Wing)

2. Controller:
60 cm hose for the 2nd step
70 cm inflator hose (Trocki)
61 cm Finimeter

Both controllers were maintained and revised around March / April 2015!

Now to the technical details

Tested to depth of m: 200
Medium pressure bar: 8.5
Air: yes
Trimix: yes
Working pressure: 300 baro
Icing protection: yes
O-rings: Nitrile/EPDM
NORSOK tested: yes
Suitable for cold water according to CE: yes

Stage 2
Color: black
Material: ASA/TPU, stainless steel, brass
Weight g: 152
Volume ml: 49,5
Working principle: Upstream
Delivery quantity (l per min.): 2150
Pilot valve controlled: yes
Safety valve: yes
Rotatable: yes
Automatic venturi control:yes
Automatic inhalation control: yes
Gas tested housing: yes
Dismountable without tools: yes
Right and left usable: yes
Anatomical mouthpiece: yes
Side air shower: yes

Stage 1
Control principle: rolling diaphragm
Material: Chrome/Brass
Valve sealing: Ball
Handwheel placement: on the ground
LP 3/8" / HP 7/16" outlets: 2/1 (Deep 90 3/1)
Delivery quantity (l per min.): 5500
DIN 5/8" thread: yes
Zytel high pressure seat: yes
Thermodynamic icing protection: yes

VB 650EUR

Wuppertal

Sell for conversion my 1 year old Golem Gear Shrimp BOV, suitable for Megalodon or rEvo Rebreather.

For details see link: http://www.golemgear.com/p-524-shrimp-bov-for-megalodon-or-revo.aspx

The side bayonet closures and the MD hose match the Dräger / rEvo breathing tube. If the BOV is installed on another gyro (breathing tube), please check the appropriate adapters.

Accessories: BOV Quick Dis/Connect Adapter incl. 62cm, 3/8 UNF Miflex medium pressure hose

The condition is well maintained, slight traces of use are present.

VB 550EUR plus DHP parcel shipping or collection

Wilnsdorf

Sell Scubapro Nitrox regulator and Nitrox cylinder valve for 230bar.

Nitrox regulator, for breathing gases >= 21% O2:
1st stage Scubapro MK2Plus, thread M26
2nd stage Scubapro R295

Valve:
Threaded diving tank, cylindrical M 25 x 2 ISO according to DIN EN 144-3 / 2003, 232bar
Thread regulator Nitrox (M 26 x 2)

Regulator and valve are in good condition and have slight signs of use, about 20 dives in fresh water.
Last revision in 2013, since then no longer in use.

Together VB 119EUR plus DHL parcel shipping or collection

Wilnsdorf

UTD Z Side Mount System (Z-System)

For sale is a new sidemount system (Z-System) from Unified Team Diving. The set has only been tried twice in the pool (then rinsed) and is only a few months old. The original invoice from 2015 is available and is included. The system is absolutely fine and is only sold because it comes from a second identical diving equipment for which there is currently no longer any use.

The set has a new price of about 1000, - EUR and consists of:

1 piece Z-Isolatable Manifold (lockable bridge for technical sidemount diving), original price 340,- EUR

1 piece Z-Isolatable Manifold to Backplate Adapter (for attachment to a standard backplate, can also be used with a sidemount harness), original price 100, - EUR

1 piece Omniswivel for the backup hose with 3/8" connection (90° adapter, rotatable by 360°), original price 64, - EUR

2 pieces pressure relief valve with 3/8" connection for the first stages, original price 16, - EUR per piece

2 pieces QC6 socket and adapter connected with 3/8" connection and 18"/45cm medium pressure hose, original price per piece 110, - EUR

2 pieces QC6 plug and adapter connected with 3/8" connection and 22"/55cm medium pressure hose, original price per piece 110, - EUR

Here are the links to the manufacturer's page:
http://www.utdscubadiving.com/de/products/category/z-sidemount-systems
http://www.utdscubadiving.com/de/products/detail/507-utd-z-isolatable-manifold-brass-with-titanium-finish
http://www.utdscubadiving.com/de/products/detail/285-90-degree-swivel-for-lp-hose-on-the-utd-manifold
http://www.utdscubadiving.com/de/products/detail/149-overpressure-relief-valve-opv
http://www.utdscubadiving.com/de/products/detail/183-utd-z-manifold-to-backplate-adapter
http://www.utdscubadiving.com/de/products/detail/137-utd-qc6-female-on-1845cm-lp-input-hose
http://www.utdscubadiving.com/de/products/detail/136-utd-qc6-male-on-2255cm-lp-stage-hose

To be handed in for 600, - EUR incl. shipping, so bargain!

Berlin

I sell my rarely used Apeks set here.

The set consists of a first stage DS4 and two second stages ATX40.

On the main regulator is a long medium pressure hose 210cm mounted, the ostopus has a 75cm long medium pressure hose with bungee. The inflator hose is 55cm long and the high pressure hose has a length of 60cm. Of course, the finiter and the two boltsnaps are also part of it.

No 10 dives were made with the regulator.

VHB 220 Euro

I'm selling a Scubapro MK17/C300 DIR Set!

The main regulator consists of a first stage MK17 and a second stage C300 with a long medium pressure hose 210cm.

The backup regulator (with bungee) consists of a first stage MK17 and a second stage C300 with a medium pressure hose 70cm, an inflator hose 55cm and a high pressure hose 80cm with finiter.

The lid of the C200 is mounted on the backup regulator, the black lid C300 is included.

The set is absolutely as good as new and has only been used for a few dives.

Of course, the regulator pocket is one of them.

VHB 475 Euro

Give here this new and freshly revised and cleaned in the ultrasonic bath Swivel from Scubapro. This is installed in front of the 2nd stage to turn the regulator more comfortably towards the mouth and thus not to have a hose arch that goes in the way or in the field of view when diving, the hose is direj ́kt directed backwards.
Original price 40EUR
Shipping 2,60EUR uninsured, insured 4,99EUR, bank transfer

Teningen