Classified ads Regulator

Poseidon Cyclo 5000 O2, Revision Dec.2015
very good condition
Hose length 1,20m
with bag 2nd step

Price 160,00EUR

Anr├Âchte

Poseidon Cyclon 5000, Revision Dec.2015
very good condition
Hose length standard

Price 160,00EUR

Anr├Âchte

Poseidon Cyclon 5000, Revision Dec.2015
very good condition
Hose length 90cm

Price 150,00EUR

Anr├Âchte

exchange apeks m26 for m25

Gernsheim

Search Softcover / Mundusche for Sailor SL 350, also offer defective 2nd stage. Thank you

Oberkirch

Sell a used pressure reducer for the Dr├Ąger Dolphin circulator. It is the original 1st stage with the M24x2 Dr├Ąger Nitrox connection as a piston-controlled version including the two MD hoses for connection to the bypass and the nozzles as well as a Dr├Ąger Finimeter.
You can use it right away. Nevertheless, I recommend an inspection/revision.
Shipping is done with DHL insured for 7EUR.
149,-
It applies according to EU law for private sale, the item is sold as described to the best of our knowledge under exclusion of any warranty and return.

Brandenburg

Scubapro 1st stage MK 20 UL; slight traces of oxidation (better not to dive in salt water), but fully operational.
Only 49,-
This is a private ad

Brandenburg

Everything has to go!
z.B. regulator 2x Poseidon Cyclon 5000; with carrying bag, instruction booklet, an ice cap, finimeter, BCD connection hose, a few spare O-rings.
Little dipped (I preferred Scubapro), but have now been well packed for a few years. For safety, they should be overhauled.
Completely only 499,-

Brandenburg

I sell a used "Apeks DST" first stage with additional "5th port" output (additional medium pressure output, ideal for sidemount configuration) in good condition.

Of course, this first stage must be maintained before diving.

Photos on request.

EUR120 incl. shipping within Germany.

Berlin

Offer a new console from Poseidon here. Was on my new Xstream controller and after a ! TG exchanged for another ( which suits me better ).

As I said, nothing broken, was only exchanged because of personal sensitivities.

See photos- No traces, because as I said only one TG used.

180 EUR

Cottbus

Sell a kpl. Set with two first stages. MR 22 DFC & Abyss DFC with Voltex and Octopus and console with finimeter and compass and hose for the jacket.
280,- VB.

Lilienthal

Offer here an octopus from the quality forge of Aqualung. It is a calypso octopus.

A rubber band is attached to the octopus as a halter, so it is quickly and safely at hand.

Sale Price: 20,00EUR VB

Shipping: 6,00EUR


The shipping costs refer to shipping in advance and within the German mainland. If shipping by last name is desired, higher shipping costs will be incurred. Shipping takes place exclusively by post or DHL
The sale takes place as a private sale without guarantee, exchange, warranty according to BGB, EU law etc.

This regulator set is completely redesigned by the diving center BlueWaterDiver in Regensburg and has so far 65TGs on it.
For the complete revision, only oxygen-compatible grease was used. Thus, the controller set is fully oxygen-compatible/pure! The measurement protocols and replaced parts are included.
The set consists of:
- 2x First stage Apeks DS4, DIN connection
- 2x Second Stage Apeks XTX50
- 1x medium pressure hose, 210cm length (main controller "Long Hose")
- 1x medium pressure hose, 70 cm length (backup controller)
- 1x inflator hose approx. 50cm
- 1x DIR Zone Finimeter 200bar, approx. 55mm diameter incl. approx. 60cm high pressure hose
- 2x stainless steel carabiner 90mm for attaching the main machine and finimeter
- 1x neck rubber for backup control (bungee chord 4mm)


Accessories:
- 2x Revision Kit 1st Level (DS4)
- 2x Revision Kit 2nd Level (XTX50)
- 1x hook key for 2nd level
- 1x oxygen compatible lubricant Christo Lube MCG 111 approx. 30g
- 1x regulator bag Aqualung Red Line 50

Set price: 600EUR

Regensburg

Regulator set Apeks CTX 40 with Octopus AT 20 (identical to the XTX series) freshly revised in February 2016. 1st stage (suitable for 300 bar) can also be rotated under pressure, for optimal hose routing. Included are matching Miflex hoses and an Apeks mouthpiece instead of JAX mouthpiece. The inflator hose and the finimeter are not sold.
Private sale, therefore without guarantee and warranty. Test report of the revision can be sent on request.
Price: 320 EUR VB

Georgsmarienh├╝tte

Hello everyone, there are a total of three hoses on offer:

1/2" Miflex, see picture, approx. 77cm, dipped 1 time, then converted to long hose. VB: 20EUR+shipping or make me an offer

1/2" Miflex, (not in the picture) black, about 77cm, used, due to conversion to shorter hose. VB: 18+Shipping or make me an offer

Inflator hose, Miflex, approx. 75cm. Because of new jacket switch to shorter hose.
VB 20EUR + shipping or make me an offer.

The set consists of

ÔÇóApeks DST first stage
ÔÇóXTX 50 second stage
ÔÇóBTS Finimeter
ÔÇó100 cm and 15 cm rubber hose

Have used the stage controller about 10 times. So it's still very good as new!
I will be happy to answer any further questions by email

Price including shipping: 310EUR

22525 Hamburg

Sell a new Apeks XTX200 with octopus 40 set.
It is unused and still originally shrink-wrapped in cardboard.
Has been a gift, therefore for 375EUR

Karlsruhe

Additional respiratory controller Air 2 with medium pressure hose hose 50, - EUR VB plus shipping, for sale. In use until 2015.No revision carried out.
Private sale. No guarantee, warranty or return.

Zwickau

Offer here my Mares 1st level MR 12ST with spare rings for sale. approx. 10TG from 2009
VB 50EUR
Plus shipping or pick-up in L├╝denscheid, Lennestadt or Limburg/Diez possible

57368 Lennestadt

Still have 2 right old regulators, is rather something for the showcase.

Seemann Sub 2nd stage with MD hose

Barakuda 1st and 2nd stage

Preferably both together for 60, - EUR or against bid.

Mainz

I offer a used regulator Cressi Ellipse Titanium MC9:
1st stage MC 9 SC
2nd stage Ellipse Titanium
In addition, a Cressi regulator Octopus Ellipse and inflator hose.
Purchased in 2012: 19 dives by 2013: revised and 20 dives by the end of 2014.
Since 2015 I dive with a different regulator.
Price VB 200,- Euro

since private sale no guarantee and no return

Oberhausen

Sell regulator set Aqualung Legend with LX and two first stages. The set is newly revised in the specialist trade (cost for it: 170EUR) then no longer dipped. Invoice is enclosed. Technically everything flawless! Main controller with 210cm flex hose, second controller with 60cm and neckband. Finimeter and inflator hose also included. Original hoses are included. All this in a Beuchat regulator pocket.
Price VB. 320EUR
If you are interested or have any questions: Tel.: 0172 568 7730
K. Bienick

H├╝ckelhoven

Hello

sell used Apeks DS4. The first stage works perfectly.


Revision is recommended as always with used regulators.

Price 70EUR plus shipping

Sell new and unused exhibit

1st and 2nd stage Legend DIN with Miflex MD hose for 350EUR

I offer a Poseidon Cyklon 300 regulator with console. The Aqualung Monitor 2 computer in the console has stopped working. Otherwise there is a compass and a Fini in the console
I was in the water with it recently and the regulator worked perfectly. However, I would still recommend a revision.

Price: 160,- VB

Kaarst

Poseidon regulator (1st and 2nd stage)
Cyclone 300
Special Edition
The 73rd of 500
From 1993
Completely original with certificate, leather ribbon and wooden box.
Has never been dived.

Price: 1000,00 VB

Dortmund

I would like to sell my DIR regulator set. There are 2 regulators "Poseidon XSTREAM Deep 90" each consist of a 1st stage, a 2nd stage, two inflator hoses and a Finimeter of the brand UWATEC with mineral glass. Of course, the set also includes the Boltsnaps!

Hose lengths:
1. Controller:
210 cm hose for the 2nd step
56 cm inflator hose (Wing)

2. Controller:
60 cm hose for the 2nd step
70 cm inflator hose (Trocki)
61 cm Finimeter

Both controllers were maintained and revised around March / April 2015!

Now to the technical details

Tested to depth of m: 200
Medium pressure bar: 8.5
Air: yes
Trimix: yes
Working pressure: 300 baro
Icing protection: yes
O-rings: Nitrile/EPDM
NORSOK tested: yes
Suitable for cold water according to CE: yes

Stage 2
Color: black
Material: ASA/TPU, stainless steel, brass
Weight g: 152
Volume ml: 49,5
Working principle: Upstream
Delivery quantity (l per min.): 2150
Pilot valve controlled: yes
Safety valve: yes
Rotatable: yes
Automatic venturi control:yes
Automatic inhalation control: yes
Gas tested housing: yes
Dismountable without tools: yes
Right and left usable: yes
Anatomical mouthpiece: yes
Side air shower: yes

Stage 1
Control principle: rolling diaphragm
Material: Chrome/Brass
Valve sealing: Ball
Handwheel placement: on the ground
LP 3/8" / HP 7/16" outlets: 2/1 (Deep 90 3/1)
Delivery quantity (l per min.): 5500
DIN 5/8" thread: yes
Zytel high pressure seat: yes
Thermodynamic icing protection: yes

VB 650EUR

Wuppertal

Sell for conversion my 1 year old Golem Gear Shrimp BOV, suitable for Megalodon or rEvo Rebreather.

For details see link: http://www.golemgear.com/p-524-shrimp-bov-for-megalodon-or-revo.aspx

The side bayonet closures and the MD hose match the Dr├Ąger / rEvo breathing tube. If the BOV is installed on another gyro (breathing tube), please check the appropriate adapters.

Accessories: BOV Quick Dis/Connect Adapter incl. 62cm, 3/8 UNF Miflex medium pressure hose

The condition is well maintained, slight traces of use are present.

VB 550EUR plus DHP parcel shipping or collection

Wilnsdorf

Sell Scubapro Nitrox regulator and Nitrox cylinder valve for 230bar.

Nitrox regulator, for breathing gases >= 21% O2:
1st stage Scubapro MK2Plus, thread M26
2nd stage Scubapro R295

Valve:
Threaded diving tank, cylindrical M 25 x 2 ISO according to DIN EN 144-3 / 2003, 232bar
Thread regulator Nitrox (M 26 x 2)

Regulator and valve are in good condition and have slight signs of use, about 20 dives in fresh water.
Last revision in 2013, since then no longer in use.

Together VB 119EUR plus DHL parcel shipping or collection

Wilnsdorf

UTD Z Side Mount System (Z-System)

For sale is a new sidemount system (Z-System) from Unified Team Diving. The set has only been tried twice in the pool (then rinsed) and is only a few months old. The original invoice from 2015 is available and is included. The system is absolutely fine and is only sold because it comes from a second identical diving equipment for which there is currently no longer any use.

The set has a new price of about 1000, - EUR and consists of:

1 piece Z-Isolatable Manifold (lockable bridge for technical sidemount diving), original price 340,- EUR

1 piece Z-Isolatable Manifold to Backplate Adapter (for attachment to a standard backplate, can also be used with a sidemount harness), original price 100, - EUR

1 piece Omniswivel for the backup hose with 3/8" connection (90┬░ adapter, rotatable by 360┬░), original price 64, - EUR

2 pieces pressure relief valve with 3/8" connection for the first stages, original price 16, - EUR per piece

2 pieces QC6 socket and adapter connected with 3/8" connection and 18"/45cm medium pressure hose, original price per piece 110, - EUR

2 pieces QC6 plug and adapter connected with 3/8" connection and 22"/55cm medium pressure hose, original price per piece 110, - EUR

Here are the links to the manufacturer's page:
http://www.utdscubadiving.com/de/products/category/z-sidemount-systems
http://www.utdscubadiving.com/de/products/detail/507-utd-z-isolatable-manifold-brass-with-titanium-finish
http://www.utdscubadiving.com/de/products/detail/285-90-degree-swivel-for-lp-hose-on-the-utd-manifold
http://www.utdscubadiving.com/de/products/detail/149-overpressure-relief-valve-opv
http://www.utdscubadiving.com/de/products/detail/183-utd-z-manifold-to-backplate-adapter
http://www.utdscubadiving.com/de/products/detail/137-utd-qc6-female-on-1845cm-lp-input-hose
http://www.utdscubadiving.com/de/products/detail/136-utd-qc6-male-on-2255cm-lp-stage-hose

To be handed in for 600, - EUR incl. shipping, so bargain!

Berlin

I sell my rarely used Apeks set here.

The set consists of a first stage DS4 and two second stages ATX40.

On the main regulator is a long medium pressure hose 210cm mounted, the ostopus has a 75cm long medium pressure hose with bungee. The inflator hose is 55cm long and the high pressure hose has a length of 60cm. Of course, the finiter and the two boltsnaps are also part of it.

No 10 dives were made with the regulator.

VHB 220 Euro

I'm selling a Scubapro MK17/C300 DIR Set!

The main regulator consists of a first stage MK17 and a second stage C300 with a long medium pressure hose 210cm.

The backup regulator (with bungee) consists of a first stage MK17 and a second stage C300 with a medium pressure hose 70cm, an inflator hose 55cm and a high pressure hose 80cm with finiter.

The lid of the C200 is mounted on the backup regulator, the black lid C300 is included.

The set is absolutely as good as new and has only been used for a few dives.

Of course, the regulator pocket is one of them.

VHB 475 Euro

Give here this new and freshly revised and cleaned in the ultrasonic bath Swivel from Scubapro. This is installed in front of the 2nd stage to turn the regulator more comfortably towards the mouth and thus not to have a hose arch that goes in the way or in the field of view when diving, the hose is direj ́kt directed backwards.
Original price 40EUR
Shipping 2,60EUR uninsured, insured 4,99EUR, bank transfer

Teningen

Sell for conversion my 1 year old Golem Gear Shrimp BOV, suitable for Megalodon or rEvo Rebreather.

For details see link: http://www.golemgear.com/p-524-shrimp-bov-for-megalodon-or-revo.aspx

The side bayonet closures and the MD hose match the Dr├Ąger / rEvo breathing tube. If the BOV is installed on another gyro (breathing tube), please check the appropriate adapters.

Accessories: BOV Quick Dis/Connect Adapter incl. 62cm, 3/8 UNF Miflex medium pressure hose

The condition is well maintained, slight traces of use are present.

VB 550EUR plus DHP parcel shipping or collection

Wilnsdorf

Sell for conversion my 1 year old Golem Gear Shrimp BOV, suitable for Megalodon or rEvo Rebreather.

For details see link: http://www.golemgear.com/p-524-shrimp-bov-for-megalodon-or-revo.aspx

The side bayonet closures and the MD hose match the Dr├Ąger / rEvo breathing tube. If the BOV is installed on another gyro (breathing tube), please check the appropriate adapters.

Accessories: BOV Quick Dis/Connect Adapter incl. 62cm, 3/8 UNF Miflex medium pressure hose

The condition is well maintained, slight traces of use are present.

VB 550EUR plus DHP parcel shipping or collection

Wilnsdorf

Give this first stage Titan LX Supreme ACD.
It is in very good condition and has been dived very little.
Revision has expired 8/2015 but fully functional, since the revision max 10 tg made!
Ideal for cold water.
Sale without accessories
Shipping possible, bank transfer

Teningen

A total of three hoses:

1/2" Miflex, see picture, approx. 77cm, dipped 1 time, then converted to long hose. VB: 18EUR+shipping or make me an offer

1/2" Miflex, (not in the picture) black, about 77cm, used, due to conversion to shorter hose. VB: 15+shipping or make me an offer

Inflator hose, Miflex, approx. 75cm. Because of new jacket switch to shorter hose.
VB 15EUR + shipping or make me an offer.

Sell new Beuchat VS3 regulator.
DIN 200 Bar with 75cm Miflex hose.
100EUR incl. shipping

BW


Spoil Poseidon Cyclon.
Poseidon Deep.
each for 150 Euro V.P.
Both machines have a regular
Inspection ( Last 2014 )
Danch about 5x dipped.

51371 Leverkusen

I offer the proven and robust lung automata Mares Nikos in the version as an octopus, which I have rarely dipped. It has only slight traces of use and works perfectly. Technically and optically 1 a, because I only kept it as a back-up machine at home and no longer used it. It is definitely too bad to leave lying around. The new owner will enjoy the machine for a long time to come.

Stage 2

- Housing made of technopolymer

- Hose length 100 cm

- Hose in signal color.

The new user receives a high-quality product for a long and problem-free use even under difficult conditions.

VB Euro 69,00 plus shipping Euro 6,90.

Private sale without warranty or return.

Stuttgart

Hello
I'm looking for a stage controller. Please simply offer with picture and price.
Thank you
Anonymous

44575 Castrop-Rauxel

The lung machines were no longer used after the last revision / inspection, and have been lying since the bag shown in it.

I will no longer climb into the local ponds to look at fish, ... so aknn everything can be put in good hands.

the G250 has a Mark10 1st stage (I believe) the R190 a membrane-controlled 1st stage from Apeks.
The machines have always brought me safely back to the surface, qualitatively these are indestructible parts.

Together as 2 separate systems for sale for 175, - EUR.

Wuppertal

As good as new lung automaton from Subgear
Model: SG 30 + Octopus SG 10 + Finimeter
Only twenty dives
First maintenance after 2 years or 100 dives
On with two vouchers for first maintenance =free of charge
Price: 300 EUR

66424 Homburg

Sell my MK VI with 35 hours of diving.
The MK VI is a version that has received a Poseidon update that you can dive it up to 60m. There is a green battery with it.

I am happy to have a maintenance carried out.

Price I thought of 3500euro VHB with shipping

Because of the abandonment of diving for health reasons I offer a professional cold water regulator
of the company Poseidon.

1st stage Poseidon with protective cap

2nd stage Poseidon Jetstream and connection hose

2nd stage Poseidon Cyklon octopus in yellow and connecting tube

2 console Pivot by U.S. Divers/Aqualung with analog finimeter and depth gauge with drag pointer

Inflator hose for the buoyancy vest

Only to be handed over completely for EUR 499.- + EUR 7,50 shipping


The regulator has only been used during about 4 or 5 dives. A revision by a specialist dealer will be
recommended.

Shipping by DHL Paket. Pick-up possible.

Gie├čen

Offer here an octopus from the quality forge of Aqualung. It is a calypso octopus.

A rubber band is attached to the octopus as a halter, so it is quickly and safely at hand.

Sale price: 25,00EUR incl. shipping throughout Germany.


The shipping costs refer to shipping in advance and within the German mainland. If shipping by last name is desired, higher shipping costs will be incurred.

Shipping takes place exclusively by post or DHL


The sale takes place as a private sale without guarantee, exchange, warranty according to BGB, EU law etc.

Sell an Apex set with 1st stage, ATX 40, ATX 20 and inflator hose.

Revision was carried out in 2013.

Please send us a price by e-mail.

Mainz

Here I sell a brand new (still sealed) Mares Instinct 12s regulator.
Got it as a gift, but unfortunately can't use it!

Price 200EUR FP + Shipping

PRIVATE SALE - no return or exchange!

Properties:

Stage 1:
Compensated
Control: Diaphragm
Weight: 695g
Icing protection: yes
HD departures: 2
ND departures: 4

Stage 2:
Downstream
Superflex Hose
Weight: 150g
Venturi: yes
Breathing resistance adjustable: no
Front cover with tilting air shower
heat-exchanging hose protection

Scope of delivery:
1. Stage 12s
2nd level Instinct
ND Hose
Operating instructions

Markt Erlbach

Offer a Mares Octopus here.

Since I have switched to another company, I no longer need it.

Price we will agree simply make a suggestion.

Versan in Germany goes on me!
The sale is made by Private without guarantee and return.

Mainz

Atomic M 1 first stages, rarely used as they were planned for a rebreather.
Steps are about one year old. Atomic recommends the revision every two years. Nevertheless, the levels were checked by the specialist dealer, current test protocols are available. Nevertheless, the steps were no longer in the water.
Price is per piece.
VHB 350EUR

Berlin