Classified ads All categories

Size L

180 euros excluding shipping costs

Wolkersdorf im Weinviertel

Selling a lightly worn DUI XM40 undersuit

240 euros excluding shipping costs

Wolkersdorf im Weinviertel

This original MEDI Hydromat was refurbished in 1990 and I bought it for diving at my own risk.

The same applies to the matching MEDI full-face mask.

I have done a few dives at shallow depths with pleasure and without any problems.

Since then, the vending machine has been resting in my collection as a collector's item, protected from UV radiation and light.

I offer it for sale individually or the entire set as defective.

There are some accessories, including three intact "as new" check valves. Here, the rubber is still quite supple.

For collectors, this is an attractive, very well-preserved piece that probably had not been used before 1990. I can well imagine that based on the condition.

Total price for the set: 290 euros, regulator only 199 euros, full face mask only 99 euros

Ostsachsen

Hello, I ( M ) am looking for a Buddy whether M or W for chilled dives in RLP, Bavaria and Austria. Vdst Training Bronze (2022) has now been unable to dive for a little over a year after surgery and would like to get routine again.

Kaiserslautern

HID Lamp Head 24W by YellowDiving

EUR 150.00

The sale is made under exclusion of any liability for material defects. Returns or exchanges are excluded.
Payment only by bank transfer in advance.

Shipping within D by DHL EUR6.00

Gießen

AMMONITE SYSTEM Baking Lamp LED ONE

Unsubmerged in original packaging

Fixed price EUR60,-

The sale is made under exclusion of any liability for material defects. Returns or exchanges are excluded.
Payment only by bank transfer in advance.


Shipping within D by DHL EUR6.00

Gießen

AMMONITE SYSTEM baking powder lamp LED ONE Mini

Unbagged, in original packaging

Fixed price EUR50,-

The sale is made excluding any liability for material defects. Returns or exchanges are excluded.
Payment exclusively by advance bank transfer.


Shipping within Germany via DHL EUR 6.00

Gießen

- Piezo switch
- E/O Cord 40cm
- new without use

Fixed price EUR 150.00

The sale is made excluding any liability for material defects. Returns or exchanges are excluded.
Payment exclusively by advance bank transfer.


Shipping within Germany via DHL EUR 6.00

Gießen

Light For Me Backup Lamp Backup 3XPG
1000 lumens
12W power
16° Spot
For 3x C-battery tank

EUR 50.00

Unused

The sale is made excluding any liability for material defects. Returns or exchanges are excluded.
Payment exclusively by advance bank transfer.

Shipping within Germany via DHL EUR 6.00

Gießen

Fixed price EUR 150,-

The sale is made excluding any liability for material defects. Returns or exchanges are excluded.
Payment exclusively by advance bank transfer.

Shipping within Germany via DHL EUR 6.00

Gießen

Suex Actioncam Gopro Mount

Price: 40EUR

The bracket is attached to the front of the trigger...

For this you have to drill 2 holes... And then sunk it... So that the screws don't get in the way...

The camera can be rotated 360° on the bracket and can be adjusted in any position...

Bracket is supplied with all the necessary screw... Incl. the inch screw for the camera... All screws in VA2

The holder is an in-house development and comes from a 3D printer ...

Recklinghausen

Sell here a Universal Compass Mount for the Suex VR VRX XJS XJ37 ... or Divertuge or Carbon Scooter ... suitable for the Silva c58 ... the compass has 2 adjustable axles, which allows the compass to be adjusted very well to the magnetic field of the scooter...

Price: 50EUR

For a small surcharge of 10EUR, a V2A Stage clamp, which is covered with fabric tape, can be purchased ...

The compass is not part of this offer ...

The holder is an in-house development and comes from a 3D printer ...

If you are interested, just contact us ...

Tel.. +491725330952

Recklinghausen

Bracket for Original Eezycut Harrness Version ... But should also fit with replicas ... One-handed conditions when scootering ... Always at hand ...

Watch the video 😃

https://youtu.be/v99WzATZZMw?si=MtS81K3fYIqID6Xw

Eezycuter is not part of the delivery. Supplied is a holder with the required fastening material ...

Have a look at my other ads ...

Recklinghausen

Sell a compass mount for the Suex VR and XJS here...

Price: 50EUR

Suitable for the Silva c58 ... the compass has 2 adjustable axles, which allows the compass to be adjusted very well to the magnetic field of the scooter...

The compass is not part of this offer ...

In this video everything you need to know is explained...

https://youtu.be/GkMAygNgFo4

The holder is an in-house development and comes from a 3D printer ...

Dipped this mount on my VR for 2 years without any problems ...

If you are interested, just contact us ...

Recklinghausen

Sell here a compass actioncam mount for the Suex VR and XJS...

Price: 60EUR

Suitable for the Silva c58 ... the compass has 2 adjustable axles where the compass can be adjusted very well to the magnetic field of the scooter...

The compass is not part of this offer ...

New on this mount is the mount for the action cam Gopro or the same

The bracket comes with all the necessary screws... incl. The inch screw for the camera... All screws in VA2

You can either mount the compass or an action cam...

The holder is an in-house development and comes from a 3D printer ...

If you are interested, just contact us ...

Recklinghausen

Suex Bracket for depth gauge...

Price: 40EUR

Bracket has been specially developed for the Uwatec/Scubapro Digital Bottom Timer 330m...

It can be individually adjusted from the angle of inclination... So that a good readability is guaranteed for everyone...

Bracket fits every Suex model that has the T-Fix mount...

The holder is made by us with the 3D printer...

The bottom timer is simply clicked into the holder and secured with demmotibg ... So it is possible to get it out of the holder again without destroying it ... Bracket can be mounted both left and right ...

Here is the assembly video

https://youtu.be/wDOHnESjNkM?si=TeYsC6oIX5kC-Ey9

Delivery without bott timer...

Only the bracket is supplied...

Recklinghausen

Selling my Lavacore full-body suit (long legs and sleeves) in women's size XS - because I bought it too small... therefore it's barely been worn (maybe three times in total), like new, without any flaws or signs of wear. Local pickup near Munich or Regensburg, or shipping at buyer's expense. Price: EUR40.00

Bayern

Hello

We give up our hobby.

The suit is in good condition. Manufacturer is unknown. Think it's only 5 mm thick. Unfortunately, it says nothing on it.

50.00 euros

Hamburg

Hello

the stuff has only been used 20 times in Hemmoor. 1,600.00 total

Top condition. Longer hose for the main azem regulator.

12L bottle TÜV must beu

Not in the picture but with mask and snorkel

Pick-up only

Hamburg

Hello

we give ourselves up as a hobby. The stuff was used 20 times in Hemmoor. Not in the picture but with mask and snorkel. Total 1,600.00

Excellent condition.

Bottle 10 L

Suit size M

Vest size L

Jacket size XS

Shoes size 37/38

10L bottle (TÜV certified) must be new

No shipping

Hamburg