Search Lead Bags Pair for harness
Belt width 50mm
For attachment to the backplate
Approx. 5-7kg lead capacity per bag
Please with photos
LG and thank you
Classified ads Harness
Offer Tanks/Weight Argon bottle 0,85L
Argon bottle 0,85L, Alu
G5/8 connector
with loop for harness
85EUR incl. shipping
G5/8 connector
with loop for harness
85EUR incl. shipping
Berlin
Offer Tanks/Weight Backplate
backplate, 6mm/5kg, agir-brokk, without harness.
EUR 70 incl. shipping.
EUR 70 incl. shipping.
Offer Dive Gear JJ-CCR Rebreather
For sale is a fully functional JJ-CCR rebreather. (Pre CE Version) The device was used by me as a second unit for the domestic waters.
In December 2016, the head was at Narked@90 to replace the Sherwater cable.
The device was cleaned after each dive and regularly disinfected. In addition, the rebreather is always!! dry and stored in the house at room temperature.
The unit has been in my possession since mid-2014 and has been in use since the round about 150h.
Circumference:
• JJ-CCR head with Sherwater Predator and HUD.
• Canister with stand.
• Lime tank.
• Original JJ-CCR "Back mounted" lungs.
• O2 Manual Ad in.
• ADV.
• Golem Gear BOV + breathing snake.
• MD and HD hoses.
• Apek's steps. ( O2 & Dilluent)
• Original JJ-CCR Wing.
• Long back plate with original harness, shoulder padding and OMS back padding.
The device can be viewed by appointment in Meerbusch.
Not included are o2 sensors and bottles.
Price: 4500EUR VHB. Plus Shipping
Pictures are welcome by e-mail on request.
In December 2016, the head was at Narked@90 to replace the Sherwater cable.
The device was cleaned after each dive and regularly disinfected. In addition, the rebreather is always!! dry and stored in the house at room temperature.
The unit has been in my possession since mid-2014 and has been in use since the round about 150h.
Circumference:
• JJ-CCR head with Sherwater Predator and HUD.
• Canister with stand.
• Lime tank.
• Original JJ-CCR "Back mounted" lungs.
• O2 Manual Ad in.
• ADV.
• Golem Gear BOV + breathing snake.
• MD and HD hoses.
• Apek's steps. ( O2 & Dilluent)
• Original JJ-CCR Wing.
• Long back plate with original harness, shoulder padding and OMS back padding.
The device can be viewed by appointment in Meerbusch.
Not included are o2 sensors and bottles.
Price: 4500EUR VHB. Plus Shipping
Pictures are welcome by e-mail on request.
Meerbusch
Offer Dive Gear Dräger LAR VI + Combat Harness for sale!
Hello
I sell a Dräger LAR VI with Aqualung Combat Harness in very good condition. The diving device is ready for diving and can be used immediately. As a special extra, an Aqualung Combat Harness is included in mint condition. This harness is not available for private individuals and is only made by Aqualung after ordering. Furthermore, an additional O2 bottle and a neoprene shell for the lime container at TG in extreme cold are included.
Price: 3.600,- EUR
I sell a Dräger LAR VI with Aqualung Combat Harness in very good condition. The diving device is ready for diving and can be used immediately. As a special extra, an Aqualung Combat Harness is included in mint condition. This harness is not available for private individuals and is only made by Aqualung after ordering. Furthermore, an additional O2 bottle and a neoprene shell for the lime container at TG in extreme cold are included.
Price: 3.600,- EUR
Nähe Düsseldorf
Offer Dive Light Tank lamp
UTD tank lamp, 10W LED, 4.4 Ah battery tank, E/O cords and tank holder for harness. little dipped, battery regularly discharged and in perfect condition. EUR 515.-
Bremen
Offer BCD/Vest Wing System
Wing System
I offer a WIng to everything complete with backplate and harness.
It is a WIng system of the company Dive Tec which produces absolute top quality.
Wing: DiveTec S25 bubble
Double-shell with shortened pleated hose. Three quick drains, two at the bottom rear one at the top.
Power inflator with stainless steel interior.
Rubber's mounted on pleated hose for guide inflator hose.
Bungees can be mounted, I made them off.
Bladder without damage, top condition!
Harnes:
DiveTec Luxury
Stainless steel backeplate
Shoulder pads to protect the suit.
All necessary retaining rubbers mounted:
Backup lamp, loop for inflator, etc.
All D-rings after YOU
Crotch... Belts have almost not shortened much room for manoeuvre!
Titanium knives also included
NP was 850EUR and here it is offered incl. postage in D without islands.
Please request shipping within the EU.
Price: 480VB
I offer a WIng to everything complete with backplate and harness.
It is a WIng system of the company Dive Tec which produces absolute top quality.
Wing: DiveTec S25 bubble
Double-shell with shortened pleated hose. Three quick drains, two at the bottom rear one at the top.
Power inflator with stainless steel interior.
Rubber's mounted on pleated hose for guide inflator hose.
Bungees can be mounted, I made them off.
Bladder without damage, top condition!
Harnes:
DiveTec Luxury
Stainless steel backeplate
Shoulder pads to protect the suit.
All necessary retaining rubbers mounted:
Backup lamp, loop for inflator, etc.
All D-rings after YOU
Crotch... Belts have almost not shortened much room for manoeuvre!
Titanium knives also included
NP was 850EUR and here it is offered incl. postage in D without islands.
Please request shipping within the EU.
Price: 480VB
Düsseldorf
Offer Miscellaneous Lead pockets for Wing with quick drop
For harness waist belt.
Consists of two pockets.
In each of the pockets there is a disposable inner pocket with a retaining loop.
Was only 2x in fresh water.
40EUR plus shipping
Consists of two pockets.
In each of the pockets there is a disposable inner pocket with a retaining loop.
Was only 2x in fresh water.
40EUR plus shipping
Nürnberg
Offer BCD/Vest Aqualung Axiom Gr. XS
Aqualung Dive Jacket Axiom Gr. XS - with SL II Lead System - Bargain! -
As good as new - only 5x dipped with it! Original price was 386, - Euro.
Sale without return or guarantee/warranty.
Here is the description of the BCD from the manufacturer:
---------------------------------------------
The ADV diving jacket "Axiom" by Aqualung is characterized by a very good fit. This is achieved by the new "Wrapture Harness Support System". Here the bottle strap is at hip level and the main weight does not have to be carried by the shoulders. The rotating shoulder buckles and the very thin backpack do the rest.
▪ Material: Buoyancy bubble made of 500 D Armor Cordura, color inserts ArmorX, 1050D Ballistic Nylon
▪ Proven inflator unit with integrated quick drain
▪ 5 D-rings made of stainless steel
▪ 2 plastic D-rings
▪ SureLock2 Integrated Weight System - Lead pockets included
▪ Maximum loading of the lead pockets size XS: 9 kg
▪ Two trim bleaching trays for a maximum of 4.5kg lead payload each
▪ Two quick drains: 1 back down, 1 right shoulder. Flat E-Valve technology - very flat valves.
▪ octopus pocket with D-ring
▪ eyelets for attaching diving knives
▪ Solid back plate with Grip Lock bottle strap - effectively prevents the bottle from slipping
▪ NEW: PowerGripTM bottle belt: Easy attachment of the compressed air bottle and the "Finger Saver" (patent pending) of the GripLockTM system prevents the fingers from clamping when closing the bottle strap.
▪ bracket bracket
▪ Rotatable shoulder buckles
▪ Very thin backpack
▪ Incl. inflator and inflator hose made of Miflex
▪ Buoyancy Size XS: 13L
▪ Very fast drying
▪ Weight: 3,4kg
Scope of delivery:
- Jacket
- integrated lead pockets
- Inflator
- Inflator hose made of Miflex
Price: 230,- EUR VB plus 7,99 EUR packaging/shipping within Germany
As good as new - only 5x dipped with it! Original price was 386, - Euro.
Sale without return or guarantee/warranty.
Here is the description of the BCD from the manufacturer:
---------------------------------------------
The ADV diving jacket "Axiom" by Aqualung is characterized by a very good fit. This is achieved by the new "Wrapture Harness Support System". Here the bottle strap is at hip level and the main weight does not have to be carried by the shoulders. The rotating shoulder buckles and the very thin backpack do the rest.
▪ Material: Buoyancy bubble made of 500 D Armor Cordura, color inserts ArmorX, 1050D Ballistic Nylon
▪ Proven inflator unit with integrated quick drain
▪ 5 D-rings made of stainless steel
▪ 2 plastic D-rings
▪ SureLock2 Integrated Weight System - Lead pockets included
▪ Maximum loading of the lead pockets size XS: 9 kg
▪ Two trim bleaching trays for a maximum of 4.5kg lead payload each
▪ Two quick drains: 1 back down, 1 right shoulder. Flat E-Valve technology - very flat valves.
▪ octopus pocket with D-ring
▪ eyelets for attaching diving knives
▪ Solid back plate with Grip Lock bottle strap - effectively prevents the bottle from slipping
▪ NEW: PowerGripTM bottle belt: Easy attachment of the compressed air bottle and the "Finger Saver" (patent pending) of the GripLockTM system prevents the fingers from clamping when closing the bottle strap.
▪ bracket bracket
▪ Rotatable shoulder buckles
▪ Very thin backpack
▪ Incl. inflator and inflator hose made of Miflex
▪ Buoyancy Size XS: 13L
▪ Very fast drying
▪ Weight: 3,4kg
Scope of delivery:
- Jacket
- integrated lead pockets
- Inflator
- Inflator hose made of Miflex
Price: 230,- EUR VB plus 7,99 EUR packaging/shipping within Germany
Stuttgart
Offer BCD/Vest V4Tec Sidemount Harness
Offer a V4Tec Sidemount Harness kit here. The components are identical to the Go Sidemount Razor Harness. The harness is not assembled, has not yet been dipped and consists of the following individual parts:
- Schoulder Delta Plate
- Backplate
- Crotch belt ring
- Fastening tab for attaching the bladder
- 2x Low-Profile D-Ring incl. belt stopper
- 2x D-ring cranked 45° incl. belt stopper
It is sold because of a system change. Original price of the parts was about 110EUR. Shipping possible on request for an extra charge.
- Schoulder Delta Plate
- Backplate
- Crotch belt ring
- Fastening tab for attaching the bladder
- 2x Low-Profile D-Ring incl. belt stopper
- 2x D-ring cranked 45° incl. belt stopper
It is sold because of a system change. Original price of the parts was about 110EUR. Shipping possible on request for an extra charge.
Offer Dive Gear Inspiration Vision (Trimix) Rebreather
Hello
I sell my Inspiration Vision (Trimix).
The device is from 2011 and has about 100 TG in domestic waters.
- Inspiration Vision Electronics
- Counterlungs Gr. L
- Harness Gr. L
- 22 kg Wing
- Lead bags
- Housing in yellow
- ADV with Flowstop
- Tempstick
- Nitrox + Trimix Software
- 1 x 3l Diluent bottle
- 1 x 3l O2 bottle
- DIN 5/8 1st steps
- Lifting bar
- Lid set
- 1 replacement O2 sensor
- Replacement arteries
Price: 3900,- EUR
Private sale--without guarantee/warranty--no return
-
I sell my Inspiration Vision (Trimix).
The device is from 2011 and has about 100 TG in domestic waters.
- Inspiration Vision Electronics
- Counterlungs Gr. L
- Harness Gr. L
- 22 kg Wing
- Lead bags
- Housing in yellow
- ADV with Flowstop
- Tempstick
- Nitrox + Trimix Software
- 1 x 3l Diluent bottle
- 1 x 3l O2 bottle
- DIN 5/8 1st steps
- Lifting bar
- Lid set
- 1 replacement O2 sensor
- Replacement arteries
Price: 3900,- EUR
Private sale--without guarantee/warranty--no return
-
Nähe Düsseldorf
Offer BCD/Vest Monowing DIR Setup, Hollis&Halcyon + Buoy &Lamp
Hi
because of the abandonment of diving sell my monowing with two super extras, consisting of:
Hollis Solo Harness
Stainless steel backplate with slotted hole (can also be dipped with double device)
Hollis S38 Monowing
Knife
Halcyon Storage Pack
OMS Single Tank Adapter
+ Halcyon SMB buoy (1,40m!) with 30m Delrin-Reel
+ Hollis LED Backup Lamp
Everything is ready for diving and perfectly adjusted. There are all the D-rings you need, chest, side left for Fini and Stage, step for scooter, second buckle on the belly strap for the battery tank.
Lamp does not disturb the belt at all but is super integrated, sufficient as an occasional lamp anyway. The buoy fits perfectly into the back of the storage pack and is great due to the size, which is not overlooked even with waves.
Once you have dived with a wing, you will never want another jacket again, the freedom of application and the low flow resistance are simply great.
Overall, the things are at a new price of around 850 euros.
Everything is in great condition, bladder is absolutely tight and as good as unused, since I have mostly dipped the double device. The lamp works perfectly. The buoy had a small hole sealed with Aquasure and tight.
I would like to have 350 euros for the complete package.
because of the abandonment of diving sell my monowing with two super extras, consisting of:
Hollis Solo Harness
Stainless steel backplate with slotted hole (can also be dipped with double device)
Hollis S38 Monowing
Knife
Halcyon Storage Pack
OMS Single Tank Adapter
+ Halcyon SMB buoy (1,40m!) with 30m Delrin-Reel
+ Hollis LED Backup Lamp
Everything is ready for diving and perfectly adjusted. There are all the D-rings you need, chest, side left for Fini and Stage, step for scooter, second buckle on the belly strap for the battery tank.
Lamp does not disturb the belt at all but is super integrated, sufficient as an occasional lamp anyway. The buoy fits perfectly into the back of the storage pack and is great due to the size, which is not overlooked even with waves.
Once you have dived with a wing, you will never want another jacket again, the freedom of application and the low flow resistance are simply great.
Overall, the things are at a new price of around 850 euros.
Everything is in great condition, bladder is absolutely tight and as good as unused, since I have mostly dipped the double device. The lamp works perfectly. The buoy had a small hole sealed with Aquasure and tight.
I would like to have 350 euros for the complete package.
Freiburg
Offer BCD/Vest Oms Wing Set
Offer here my barely used Oms Wing 27 kg buoyancy with 3mm Oms stainless steel backplate and Oms Harness Gr M-L for sale.
Oms Wing NP 385
Oms Harness NP 199
Oms Backplate NP 90
Price 430Vb
Oms Wing NP 385
Oms Harness NP 199
Oms Backplate NP 90
Price 430Vb
32139 Spenge
Offer BCD/Vest Sopras Sub 30l Wing
I sell my 4 year old Sopras Sub Wing 30l. Only immersed in fresh water. NP 730,- for 250,- EUR
(http://offers.soprassub.com/soprassub_pricelist_eur_photos.PDF)
The ComfortTech Wing by Sopras Sub is a B.C.D. and designed for the advanced diver and for all levels of technical diving.
The back plate is not included in the scope of delivery – so you have the possibility to use your back plate with the right weight / size for you.
It is equipped with a comfort harness with wide shoulder strap, quick release and stable inflator! The buckles are very robust according to the possible load. Step straps, pockets for second mask and tools/snorkels are included. In addition, you have the option of choosing a second double bubble (not included) of 30 + 30l.
The bladder is in PU with three /six double valves (in the double bubble model). The external case and the pockets are made of Cordura 1500.12 stainless steel D-ring, as well as bungees to correct the water position and to reduce the water resistance as well as to accelerate emptying.
In addition, there is a single tank adapter.
Michael
(http://offers.soprassub.com/soprassub_pricelist_eur_photos.PDF)
The ComfortTech Wing by Sopras Sub is a B.C.D. and designed for the advanced diver and for all levels of technical diving.
The back plate is not included in the scope of delivery – so you have the possibility to use your back plate with the right weight / size for you.
It is equipped with a comfort harness with wide shoulder strap, quick release and stable inflator! The buckles are very robust according to the possible load. Step straps, pockets for second mask and tools/snorkels are included. In addition, you have the option of choosing a second double bubble (not included) of 30 + 30l.
The bladder is in PU with three /six double valves (in the double bubble model). The external case and the pockets are made of Cordura 1500.12 stainless steel D-ring, as well as bungees to correct the water position and to reduce the water resistance as well as to accelerate emptying.
In addition, there is a single tank adapter.
Michael
67482 Venningen
Offer Dive Gear Wing
Sell here used DiveSystem Tech Deep 40+40L Double Bubble Wing including Comfort Harness. The Wing was used on 17 dives, after that I got into the DIR system and it has not been used for 1 year now. The wing and harness are in very good condition (see photos).
Original price = 815,20 Euro (plus postage and shipping).
VB = 550 Euro (incl. postage and shipping in DE)
Since sale of private no exchange, no refund, no revocation, no return.
Included in delivery (see photos):
Wing with double bubble and 2 inflator hoses (main inflator short hose, backup inflator long hose)
Comfort harness
4 pockets (2 on harness, 2 extra)
Bungees for controlled air inlet and outlet
2 quick drains (dismantled because not used).
Mono bottle adapter
Manufacturer info:
Use it with backplate and single tank adapter (weight 7kg for single and double bottles) as well as without backplate and single tank adapter (weight 3kg only for single bottle)
Outer bladder double-stitched. Now it is even more resistant to wear and tear.
New coloring of the bladder and the pocket for the back plate. The colored stripe brings out the noble workmanship and sewing of the bladder, the pocket for the back plate is in the counterpart.
New linen cutter installed. Now the linen cutter is built into the front pocket. You don't even notice that you have him with you.
Bladder and harness:
Back buoyancy bladder interchangeable: 20, 27, 22/35, 40, 40+40 litri
Outer bladder made of Cordura® 1000 double-stitched
Inner bladder made of polyurethane Soltane F/B 400®
Bungees to regulate uniform air inlet and outlet
Backplate made of stainless steel AISI 316 or aluminum or carbon
Single Tank Adapter made of stainless steel AISI 316 or aluminum or carbon
(Backplate+Single Tank Adapter steel= 4kg; made of aluminum 1.2 kg; made of carbon 0.67 kg)
Harness from Cordura® 1000 den. fully adjustable
D-ring made of stainless steel AISI 316
Shoulder and chest strap with quick-release fastener, adjustable even when the wing is on and preformed also for the female body
Waist belt with stainless steel buckle
Stepper strap with quick release and stainless steel D-ring for scooters
Inflator and valves:
Inflator head with ergonomic operating handle, piston type
Inflator with simple connection knee and steel core that prevents overstretching
Three pressure relief and quick outlet valves
Accessories:
2 pockets with opening to the top (included)
1 linen cutter installed in the front pocket (included)
2 pockets with opening towards the bottom (included)
Inflator hose with quick connection (included)
Buoy pocket for the backplate (included)
Straps for fixing single or double bottles (included)
Weight:
7kg (with stainless steel backplate)
Original price = 815,20 Euro (plus postage and shipping).
VB = 550 Euro (incl. postage and shipping in DE)
Since sale of private no exchange, no refund, no revocation, no return.
Included in delivery (see photos):
Wing with double bubble and 2 inflator hoses (main inflator short hose, backup inflator long hose)
Comfort harness
4 pockets (2 on harness, 2 extra)
Bungees for controlled air inlet and outlet
2 quick drains (dismantled because not used).
Mono bottle adapter
Manufacturer info:
Use it with backplate and single tank adapter (weight 7kg for single and double bottles) as well as without backplate and single tank adapter (weight 3kg only for single bottle)
Outer bladder double-stitched. Now it is even more resistant to wear and tear.
New coloring of the bladder and the pocket for the back plate. The colored stripe brings out the noble workmanship and sewing of the bladder, the pocket for the back plate is in the counterpart.
New linen cutter installed. Now the linen cutter is built into the front pocket. You don't even notice that you have him with you.
Bladder and harness:
Back buoyancy bladder interchangeable: 20, 27, 22/35, 40, 40+40 litri
Outer bladder made of Cordura® 1000 double-stitched
Inner bladder made of polyurethane Soltane F/B 400®
Bungees to regulate uniform air inlet and outlet
Backplate made of stainless steel AISI 316 or aluminum or carbon
Single Tank Adapter made of stainless steel AISI 316 or aluminum or carbon
(Backplate+Single Tank Adapter steel= 4kg; made of aluminum 1.2 kg; made of carbon 0.67 kg)
Harness from Cordura® 1000 den. fully adjustable
D-ring made of stainless steel AISI 316
Shoulder and chest strap with quick-release fastener, adjustable even when the wing is on and preformed also for the female body
Waist belt with stainless steel buckle
Stepper strap with quick release and stainless steel D-ring for scooters
Inflator and valves:
Inflator head with ergonomic operating handle, piston type
Inflator with simple connection knee and steel core that prevents overstretching
Three pressure relief and quick outlet valves
Accessories:
2 pockets with opening to the top (included)
1 linen cutter installed in the front pocket (included)
2 pockets with opening towards the bottom (included)
Inflator hose with quick connection (included)
Buoy pocket for the backplate (included)
Straps for fixing single or double bottles (included)
Weight:
7kg (with stainless steel backplate)
Berlin
Offer Miscellaneous Divesystem Backplate Harness
Offer Divesystem Tech Deep
Harness incl. V4A backplate and mono bottle adapter incl. straps.
(no wing with you)
Price 250EUR
Private sale no guarantee or return
Harness incl. V4A backplate and mono bottle adapter incl. straps.
(no wing with you)
Price 250EUR
Private sale no guarantee or return
Ludwigshafen am Rhein
Offer Miscellaneous Backplate and Harness
Offer Alu backplate incl. luxury harness from Dolphin.
little dipped.
Price 100EUR incl. shipping.
Private sale no guarantee or return
little dipped.
Price 100EUR incl. shipping.
Private sale no guarantee or return
Ludwigshafen am Rhein
- previous page
- 1
- 2
- 3
- 4